July 29, 2025 - M.T.H. Electric Trains will be releasing two new DCS Cables later this year that will allow users to connect a DCS Handheld Remote and the Lionel® TMCC, Legacy or Base 3 command control hardware the DCS WTIU WiFI Track Interface Device. The cables will be available from M.T.H. Authorized Retailers in November 2025.
Check out each of the offerings in the scrolling list at the bottom of the page.
DCS WTIU REMOTE ADAPTER CABLE connects your DCS Remote Handheld (Item Numbers 50-1002 or 50-1038) or the remotes found in the DCS Set (50-1001) to the DCS WTIU (50-1039) for control over the WTIU with the handheld. Enjoy simulatenous control of the WTIU with the DCS Remote or any WiFi phone or tablet.
WTIU/TMCC-LEGACY COMMAND CABLE connects the DCS WiFi Track Interface Unit (WTIU) to the Lionel TMCC Command Base, Lionel Legacy Command Base, or the Lionel Base 3 Command Base for users wishing to use the DCS System to run TMCC and/or Legacy equipped locomotives.
If using DCS to control Lionel locomotives in command mode with the Lionel Base3 Command Base, users can use the WTIU/TMCC-Legacy Connector Cable and the Lionel SER2 and PDI cable or use a USB-A to USB-B cable. To use the USB-A to USB-B cable connection to the Lionel Base3 Command Base, firmware version 1.3.0 will need to be uploaded to the WTIU.
Check out each of the offerings in the scrolling list at the bottom of the page.
