

Norfolk & Western HO Scale MTH HO 4-8-4 J Steam Locomotive w/Proto-Sound 3.0
Overview
The Class J 4-8-4 was an engine of quiet superlatives. Handsome, powerful (5100 hp), and, as a test on the Pennsylvania Railroad proved, capable of hauling 15 cars at 110 mph, it was designed and styled not by one of the big three builders (ALCo, Baldwin, and Lima) or a famous designer like Raymond Loewy or Henry Dreyfuss, but by the N&W's home-grown team of designers and craftsmen at the road's Roanoke, Virginia shops. For power and quick acceleration through mountainous territory, and to make room for the largest possible boiler, they equipped the streamlined J with 70" drivers - unusually small for a 4-8-4 and fully 10" smaller than the Southern Pacific's Daylight GS-4 of the same wheel arrangement.
Built in several groups between 1941 and 1950, a mere fourteen J's were able to handle 80% of the N&W's passenger traffic, because their designers addressed one of steam power's key weaknesses: down time for maintenance and repairs. Equipped with Timken roller bearings on all axles and rods, Timken-designed lightweight pistons and rods, and an automatic lubrication system that reached more than 200 points including the bell bearings, the Js were designed to go a quarter-million miles between scheduled shop visits. Like a race car, they were engineered for quick pit stops: in less than an hour, a J could be fully serviced, lubricated, filled with coal and water and ready for its next dash over the road's 676-mile main line between Norfolk and Cincinnati, hauling the deluxe daylight Powhatan Arrow or the overnight Pocahontas.
New for 2009, our N&W J will be more fun to operate than any previous version of this magnificent locomotive, with its N&W whistle, passenger station announcements, synchronized chuff and puffing smoke, and speed control so smooth you won't spill the water in the diner. For more information on our superbly detailed model and its prototype, including surviving J No. 611, visit www.mthHOtrains.com.
Features
Proto-Sound 3.0 equipped locomotives can be controlled in command mode with any DCC compliant command control system. While the user won't have access to all of the incredible features of Proto-Sound 3.0, independent control over the locomotive is possible. This means you can continue to use your existing DCC controller to independently control your other DCC equipped locomotives in addition to your Proto-Sound 3.0 locomotive on the same track at the same time.
When using a DCC controller, the following Proto-Sound 3.0 locomotive features are accessible:
- (F0) Headlight on/off
- (F1) Bell on/off
- (F2) Whistle/Horn on/off
- (F3) Start-up/Shut-down
- (F4) PFA initiate and advance
- (F5) Cab Light on/off
- (F6) Engine Sounds on/off
- (F7) Volume low, med, high, off
- (F8) Smoke on/off
- (F9) Forward Signal Sound
- (F10) Reverse Signal Sound
- (F11) Coupler Slack Sound
- (F12) Grade Crossing
- (F13) One-Shot Doppler on/off
- (F14) Extended Start Up
- (F15) Extended Shut Down
- (F16) Labor Chuff
- (F17) Drift Chuff
- (F18) Smoke Volume low, med, high
- (F19) Single short whistle toot
- (F20) Coupler Close
- (F21) Feature Reset
- (F22) Idle Sequence 1
- (F23) Idle Sequence 2
- (F24) Idle Sequence 3
- (F25) Idle Sequence 4
- (F26) Brakes auto/off
- (F27) Cab Chatter auto/off
- (F28) Clickety-Clack auto/off
- Proto-Sound 3.0 With The Digital Command System Featuring: Quillable Whistle With Passenger Station Proto-Effects
- Unit Measures:15 3/8" x 1 1/2" x 2 1/4"
- Operates On 18" Radius Curves