Available Items

20-91775

O Scale Premier 35’ Woodsided Caboose
  • New York Central

20-91776

O Scale Premier 35’ Woodsided Caboose
  • Nickel Plate Road

20-91777

O Scale Premier 35’ Woodsided Caboose
  • Union Pacific

20-91778

O Scale Premier 35’ Woodsided Caboose
  • Louisville & Nashville

2022 Premier O Scale 35' Woodsided Caboose Announced

June 14, 2022 - M.T.H. Electric Trains will be releasing the Premier O Scale 35' Woodsided Caboose in four select liveries in 2022. Each of these unique schemes will be available in limited production quantities and will begin shipping to M.T.H. Authorized Retailers in January 2023.

Check out each of the schemes in the list on the left.

CUSTOM RUN 35’ WOODSIDED CABOOSE OFFERINGS

In addition to the M.T.H. releases, you can find all the 2022 Custom Run models of the Premier 35’ Woodsided Caboose that M.T.H. is producing for M.T.H. Authorized Retailers by going HERE.

PROTOTYPE HISTORY

Before railroads, “caboose” referred to a small cookhouse on the deck of a sailing ship. Nobody knows for sure, but it was likely the 1850s before the first railroad caboose gave a train crew shelter from the weather. The Civil War era marked the emergence of boxcar-like cabin cars or conductor’s cars with side and perhaps end doors, windows, a heating and cooking stove, bunks, and roof lanterns to mark the end of the train.

But management often resisted providing creature comforts to crews, and it would be well into the 1870s before cabooses were widespread on American trains. While the cupola, known then as a “lookout” or “observatory,” first appeared during the Civil War era, flat-roofed cabooses outnumbered cabin cars with cupolas as late as the 1880s. By the turn of the century, however, the cupola caboose had attained its final shape, one it would keep until cabooses became extinct in the 1980s.

What did change significantly in the early 20th century was the solidity of caboose construction. As with many changes in railroad equipment, it was instigated in part by legislators. The end of a train was a particularly dangerous place to be, and numerous wooden cabooses were crushed by rear-end collisions or simply the brute force of the large pusher locomotives then coming into use. State legislators took note — no doubt prompted by constituents who worked for railroads — and began to demand stronger caboose construction. One example was a 1913 Ohio law mandating steel underframes on cabooses used in pusher service. Since many northeastern railroads ran through Ohio, this law had a widespread effect.

The Premier model represents a typical woodsided, steel under­frame caboose built in the early 20th century. While new construction generally switched to all-steel by the 1920s, older wood cabooses with steel underframes were still seen on American railroads into the 1960s.

Product Features

  • Intricately Detailed Durable ABS Body
  • Detailed Interior
  • Metal Wheels and Axles
  • Die-Cast 2-Wheel Trucks
  • Operating Die-Cast Metal Couplers
  • Colorful, Attractive Paint Schemes
  • Fast-Angle Wheel Sets
  • Needle-Point Axles
  • Near-Scale Proportions
  • Operating Interior Lighting
  • Brakeman Figure
  • Unit Measures: 10 1/16” x 2 13/16” x 2 1/16”
  • Operates On O-31 Curves