P-5a Box Cab Beer Train Set
Product Line: Premier
Roadname: Pennsylvania
Shipping Date: Shipped
P-5a Box Cab Beer Train Set w/Proto-Sound 2.0 - Pennsylvania



Set Features: Pennsylvania P-5a Electric Engine, (5) 36' Woodsided Reefer Cars, (1) N-8 Caboose

Product Number: 20-5636-1
M.S.R.P. $ 899.95
First appeared in: 2008 Volume 2
Conceived in 1931, the Pennsy's P5a was intended to be the last step in the search for a mainline "juice jack" that had begun with the FF1 in 1917. A collaboration between General Electric, Westinghouse, and the Pennsy's electrical staff, the design proved to be a winner. Engine crews liked the P5a's because they were smooth, powerful, and cleaner than the K4s Pacifics they displaced on many runs. Six 625 hp electric motors geared to three axles with 72-inch drivers gave the new engine 3,750 continuous horsepower and a top speed of 90 mph on passenger runs.


But the success of the Pennsy's passenger service proved too much for the P5a, whose limit was about 8-10 cars on high-speed runs. The introduction of the GG1 in 1934 allowed the Pennsy to operate longer passenger trains with a single locomotive, and pushed the P5a into freight service - where it found its true calling. Regeared to a top speed of 70 mph, the P5a fleet
became the backbone of electric freight service on the Pennsy for the next several decades.


The P5a's were originally built with box cabs and, like all box cab locomotives, made engine crews a bit nervous about their exposure in an accident. After a grade crossing collision with a truckload of apples proved fatal for the crew, the final 28 P5a's built in 1934 and 1935 were redesigned with a center cab in the image of the GG1 and labeled P5a Modifieds. In freight service, P5a's were frequently double- and triple-headed; when available, a P5a Modified was used as the lead unit for crew safety.


The P5a Boxcab joins the Premier Line in 2008, a perfect companion for our previously-released P5a Modified. This model is equally at home hustling passenger varnish or dragging a long freight -and thanks to Proto-Sound 2.0, you can easily double- or triple-head boxcab and modified versions just like the prototype.


Did You Know?


The prototype P5a, like our model, featured a blind (unflanged) center axle to allow it to negotiate tighter curves.


Automatic Pantograph Operation Explained


Users operating the P5a in conventional mode will find that by depressing the transformer's direction button to stop the locomotive, the rear pantograph will remain in the up position while the lead pantograph slowly rises up. Once the lead pantograph is in its up position, the rear pantograph will slowly lower into the down position. At this point another press of the direction button will cause the locomotive to reverse making the lead pantograph now the rear pantograph and in the up position.


In command operation two operating modes will be offered; auto and manual. Auto mode will behave similar to conventional mode with the rear pantograph in the up position when moving. The up and down movement of the pantograph will be direction controlled using the DCST Digital Command Control System. In Manual mode, the user will have to raise and lower both pantographs via the DCST System as they wish regardless of directional state.

Features Set Features

  • Die-Cast P-5a Electric Locomotive
  • 5-Car Beer Reefer Set
  • N-8 Caboose


    Locomotive Features

  • Directionally Controlled Headlights
  • Intricately Detailed Die-Cast Body
  • Metal Wheels, Axles and Gears
  • Remotely Controlled Operating Pantographs
  • Enhanced Detail Die-Cast Truck Sides & Pilots
  • (2) Remotely Controlled Proto-Couplersr
  • Authentic Paint Scheme
  • Metal Chassis
  • (2) Precision Flywheel Equipped Motors
  • Lighted Cab Interior
  • Opening Doors
  • Opening Hatches
  • Illuminated Number Boards
  • Locomotive Speed Control In Scale MPH Increments
  • (2) Engineer Cab Figures
  • Unit Measures:20" x 2 5/8" x 4"
  • Operates On O-72 Curves


    Freight Car Features

  • Intricately Detailed Durable ABS Bodies
  • Die-Cast 4 and 6-Wheel Trucks
  • Operating Die-Cast Metal Couplers
  • Separate Metal Handrails
  • Fast-Angle Wheel Sets
  • Needle-Point Axles
  • Opening Car Doors